Custom Fit Roof Rack Kit With RB1250S | RLTF | RRRTV168
(14 reviews)
Price: $582.33
In Stock
Custom Fit Roof Rack Kit With RB1250S | RLTF | RRRTV168
Item # RR55HP
Our Price: $582.33
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (14)
- Q & A (0)
- Videos (5)
- Photos
Rhino Rack Roof Rack - RR55HP
- Square Bars
- Crossbars
- 50 Inch Bar Space
- Rhino Rack
- Silver
- Overhang
- 2 Bars
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.
Features:
Rhino-Rack HD Crossbars - Silver - Qty 2:- Heavy-Duty square crossbars let you build a roof rack system from scratch
- Built-in C-channel on top of each bar is designed for mounting Rhino-Rack Heavy-Duty accessories and carriers
- Rubber strip in the channel helps to cushion load and provide slip resistance
- Built-in channel on bottom of each bar for mounting to Rhino-Rack Heavy-Duty roof rack legs
- Lightweight, extruded, structural-grade aluminum construction for strength and durability
- Silver color
RLTF Legs for Rhino-Rack RTC and RT Tracks - Qty 4:
- Mount with included barrel nuts into the channels on your Rhino-Rack RTC- or RT-style tracks
- Tapered wedges included so that crossbar remains level on sloping surfaces
- Position anywhere along the tracks to accommodate different-size loads
- Include built-in security hardware that deters theft - leg bolts require special tool (included) to loosen
- Constructed of UV-resistant, glass-reinforced nylon
Rhino-Rack RT Roof Rack Tracks - Rivet Mount - Qty 2:
- Create strong, low-profile attachment points for Rhino-Rack RLTF track-mounted legs
- Allow you to easily move legs and crossbars to a new position to accommodate different-size loads
- Mount directly to your vehicle with a naked roof - also work for camper shells and hard tonneaus
- Attach with included stainless steel pop rivets - rivet gun required
- Constructed of extruded aluminum with an anti-corrosion coating
- Include 4 endcaps that provide a finished look for the tracks
RB1250S Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 50" Long - Qty 1
RLTF Rhino Rack RLTF Roof Rack Legs for RT and RTC Tracks - 3" Tall - Qty 2
RTV168 Rhino Rack Rivet Mount RT Tracks - 66" Long - Qty 2
Replaces RT16
Video of Custom Fit Roof Rack Kit With RB1250S | RLTF | RRRTV168
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Rhino-Rack RT-Style Roof Rack Tracks Review
What's going on, everybody Adam here with etrailer. Today, we're gonna be taking a look at this really cool track system. It is the Rhino-Rack RT-Style roof rack track system. Some vehicles, we don't have the option to put a roof rack on the roof. Kind of like our Odyssey, we have here. Usually it's because of sliding doors, but there are some other instances, where we aren't gonna be able to put a roof rack on here.
But with these rails, it's going to allow us to do that. We can do a two-bar setup, to get a lot of accessories on our roof. With the Rhino-Rack kit, we have two different cross bars to pick from, and two different colors for each. Or we can just go with the arrow cross bars. It's gonna be a little bit quieter up on your roof, a little bit more aerodynamic.
And then, we're gonna have the HD bars as well. So pick whichever ones you think is gonna be best for you. In my opinion, the arrow bars are typically the ones that are gonna work with most of your accessories. On the one side, we're gonna have an open little slot, so we don't have to remove anything, to put in our accessories. And with our towers that we're using, for the arrow bar system, all of your accessories are gonna slide in this little end cap here.
So you don't have to remove anything, which is nice. And it goes all the way along the whole entire track. So you really find out exactly where you wanna put your bars. And it's gonna accept a block that is about 1 inch by 13/16 of an inch. The Rhino-Rack system is awesome, when it comes to taking your towers and your crossbars off.
All you need is your key. You're gonna unlock this, and look at that. All you gotta do is pull these in, pull this out, and we're gonna have a little end cap here. If you wanted to take these off, all you have to do is just take the little tool, loosen it, and slide it all the way off. But I do not mind having these on here, cause it's gonna be a lot quicker than your other option, which is Thule. The Thule ones, the towers are gonna take a little bit longer to take off, but they won't leave this little bottom section. So that's kind of all up to you. I like having these here, just because it makes for adjusting the whole entire roof rack a lot quicker. And also, I just don't mind the look. I think it kind of looks cool. So, if I we're to go with one of the two kits, you have an option for, whether it's a Thule or the Rhino-Rack, I would definitely go with the Rhino-Rack. So if we wanted to go back to the bare track system, it would just loosen it up, and then you can just go ahead and slide it out and we're done. So, I think that's also gonna be quicker, than the Thule option, which is why I really like the Rhino-Rack. Of your two options, both the Thule and the Rhino-Rack, the track system is gonna be a flat black. Which I think that's the best looking, in my opinion. I don't know if it's just because of our white car, but it does look really, really good. And that's pretty much it, for a look at the Rhino-Rack RT-Style roof rack track system..
Customer Reviews
Custom Fit Roof Rack Kit With RB1250S | RLTF | RRRTV168 - RR55HP
Average Customer Rating: 4.6 out of 5 stars (14 Customer Reviews)
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.by: Patrick09/18/2023
Ford Flex
Product itself is fantastic, I strongly recommend.
I have had these on for more than a year. Most common use case is carrying a 60lb, 16' long canoe.
I installed with rivets into the roof sheet metal. No issues at all with any rivets coming loose, and zero leakage. I use it with a Yakima crossbars with the quick release mounts. The feet are bolted to the tracks. The crossbars just click into the feet. They take literally less than a minute to attach or remove. I've had a few roof rack systems and this is by far the best.
I used the etrailer videos for the installation and they were more than enough. The riveting was nerve-wracking on the first one, but actually very simple. I suggest really taking your time to assure parallel. This can be tricky depending on your roofline. I marked a centerline down my roof and set the tracks based on that.
The only downside I have run into is not at all a fault in the tracks. Because they rivet into the roof sheet metal, it's susceptible to a bit of flex. I see this under the front of the tracks when I crank down on the bowline of the boat. That's a very large lever pulling down on the rack into the roof sheet metal. No lasting issues, I can just see the metal move.
Another small thing to note is that if your roof is curved where the front or real of the rail lands, the plastic end cap might have a small gap under it. It's not itself held down to the roof, it just slots into the track. I have a small gap on mine and it's not a functional issue at all.
by: Joe03/18/2018
Here are some pics of the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 50" Long - Qty 2 installed on my 2011 Honda CR-V.
That I recently purchased.
by: Glen 03/30/2024
Wish they had a kayak rack to mount to areo bars
by: Javier12/05/2023
The rivets are way too small and they popped out from the roof top leaving holes on the roof of my van. Totally dissatisfied and angry.
by: Mike04/23/2021
Kit was great, except my SnugTop cover required longer T-Bolts for mounting the tracks. The 1.5 inch ones provided were too short. It was a little tough sourcing T/Bolts that would work. It would have been nice if longer T-Bolts could have been an option from Rhino Rack.
by: Claire 02/05/2023
Thank you for the very speedy customer service! My roof rack is already here!
by: Kenrick08/03/2020
I was in a roof rack jam. There was a national shortage of the rack I needed for my car and our summer vacation was a week away. I went to etrailer.com when I couldnt find the roof rack anywhere else on the web. Another website actually suggested that they might have what I needed.
I spoke to Ashley E on the phone to make sure that I was picking the right parts. Ashley was very helpful and knowledgable. She helped me find the right roof rack and made sure that I received it in record time. I am a customer for life!!!
by: Joshua 11/10/2021
Excellent customer service, all current manufacturers for this type of equipment is not available for purchase because Yakima, Thule, even Rhino Rack did mention from customer service representatives from these 3 companies states you are better off purchasing from a distributor such as E-trailer. This company definitely had the transfer equipment from a Yakima support base to a Rhino Rack crossbar system. I needed the additional load weight and Jaime from E-Trailer was extremely patient and helpful…seriously awesome customer service…also my package came 2 days earlier in this truck driver shortage too. Job well done.
by: Timothy08/20/2019
2005 Nissan Armada
This loader is amazing...I easily load a 4' x 14' Sunfish sailboat at 120lbs easily without damaging my 2005 Nissan Armada...super sturdy...exactly as advertised. Note:. I order the extra heavy bar and did not need it! Now I take my sailboat with me while I pull my travel trailer. You won't be disappointed. Etrailer ROCKS IN CUSTOMER SERVICE...THEY HUNTED DOWN ALL INFO NEEDED TO MAKE THE PURCHASE...give DENA W a big raise!!!!!!
by: Will09/10/2021
I don't use it as often as I would like but after a year it is still attached and works as intended. The rubber strips to reduce noise came partially loose, but with some fiddling they seem to be hanging in there now. For my vehicle at least, I used a professional (local auto shop) to install as I was not going to take a drill to my car.
by: Lou F.11/02/2014
The Rhino rack has been working well. It is a relief to get my ladder out of my car and to be able to use the back seat.
by: Brian03/03/2018
The entire rack system (tracks, feet, aero crossbars, ladder straps, and load stops) installed and worked great for the intended use. Also, the service from etrailer was excellent.
The only drawback to this system is the necessity of purchasing a pneumatic rivet gun ($40) for mounting the tracks, but hey, it's a custom rack and i ended up with a cool tool.
Thanks.
by: Jakob06/05/2020
Sturdy material and easy to install with a combination of YouTube and the provided paperwork!
by: Josh09/30/2021
Mostly satisfied. Not issue of etrailers and nothing really wrong with the product but do find it funny and a bit dumb that RhinoRack gives you security screws to hold feet to track but the rails are attached with a standard bolt that can be easily seen and accessed by anyone.
by: Patrick 09/11/2022
by: Jonathon 04/15/2023
by: Brittany 10/03/2022
by: Gary 08/19/2021
by: Brad 05/06/2021
by: Daniel 12/24/2022
by: Matthew 03/19/2021
by: Daniel 08/07/2021
by: Kyle11/10/2022
Nice rack system, strong and durable. Used on a Ford e350 to mount solar panels. Only draw back, one of the L brackets that goes under the rain gutter was not bent square enough and this caused the bracket to slide off when tightened. I had to adjust this with a clamp and hammer, no issues since.
by: ashley10/22/2021
I got the roof rack mounted anyways. Better pics to come when it's all finished!
by: Jesse08/30/2023
I was building a rack for the skin on frame sailboat I built. I needed a crossbar on the top of my truck but the tracks were longer than I needed. I ended up cutting one of the tracks in half and redrilling the holes for the end caps on the cut ends. It was a little difficult to bend the track along the curved profile of my 2019 Ram Classic roof and get the holes where I needed. It says not to use a pop riveter but I didn't have a pneumatic one and have very good grip strength. I needed every bit of my grip strength in both hands to make it work but it did, in fact work. I used tape to cover the track around the rivets and prevent scratches because when the rivets pop, it's a little out of control. Overall it turned out well. I ended up machining a custom crossbar and T nuts due to having a machine shop on my garage.
25
199
Show More Reviews
See what our Experts say about this Rhino Rack Roof Rack
- Can I Carry Two Kayaks Side by Side on My Roof Rack?The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
view full answer... - Crossbar Pads to Carry a Surf Board on Rhino-Rack Heavy Duty CrossbarsYes, we do have foam pads that will fit around your Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250 and allow you to carry your surf board. You can use the Rhino-Rack Crossbar Pads w/ Tie-Downs # RRRWP04. These pads will fit your HD crossbars. I have included a picture from the instructions manual that shows this as a fit.
view full answer...
- Will the Rhino-Rack HD Crossbars Allow Me to Transport 2 Kayaks on My 2014 Kia Sorrento LX?Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 50" Long - Qty 2 # RB1250B-2 (black) and # RB1250 (silver) are compatible with the bare roof on your 2014 Kia Sorrento LX without a vista roof. For a complete roof rack system, you will need the following parts: - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK179 For a J-style carrier...
view full answer... - Roof Rack Recommendation to Carry 2 Kayaks on 2014 Toyota Prius C and 2010 Toyota PriusThere is a Rhino Rack roof rack that will fit both vehicles if you switch out the Custom DK Clamps and Pads. For the 2010 Toyota Prius, you will want the following parts: Crossbars # RB1250 Leg Kit # RRRLKHD Custom DK Clamps and Pads # DK195 For your 2014 Toyota Prius C you will want to add Custom DK Clamps and Pads # DK351. Before you attempt to carry 2 kayaks on the roof of your Prius you will need to consult your owner's manual to determine if you have the carrying capacity for...
view full answer... - Parts Needed to Move Rhino-Rack 2500 Series Roof Rack to 2014 Toyota Prius CA vehicle-specific portion of the Rhino-Rack roof racks for your 2014 Toyota Prius C is the Custom DK Clamps and Pad kit # DK351 that you referenced and this kit is used for a number of their 2500-series racks. You may also need a leg kit; which one will depend on the crossbars you have (the 2500 series includes several types). If you have the heavy-duty crossbar # RB1250 you will use leg kit # RRRLKHD; if you have Aero crossbars you'll instead use # RRRLKVA. The link provided will show...
view full answer... - How Do Roof Racks Attach to a 2012 Hyundai ElantraRhino-Rack 2500 Series Leg Kit # RRRLKHD is just the legs but for them to actually fit your 2012 Hyundai Elantra you need the proper clamp kit. If you have a 4-door sedan with no rails or crossbars already on the roof you would use clamp kit # DK301 and bars # RB1250. If you have a Touring model with no rails or crossbars you would use clamp kit # DK010 and bars # RB1250. Clamp kits have what is basically a hook that attaches to the roof right above the doors in the door jamb. If you...
view full answer... - Is Rhino-Rack 2500-Series Roof Rack Compatible with Thule Force Cargo Box # TH624The Rhino-Rack 2500-Series roof racks can include either square Euro crossbars, their Vortex Aero bars or their heavy-duty rectangular bars. The Euro square bars and the Vortex Aero bars both are fully compatible with the Thule Force XT Cargo Box # TH6356B. The heavy-duty cross bars # RB1250 are not. The Thule Force XT requires that the spread between the crossbars be at least 23-5/8-inches. As long as the rack has this minimum spread and uses one of the two compatible bar types it will...
view full answer... - Will the Inno Shadow 16 Fit on Rhino-Rack Crossbars on My 2013 Toyota Prius?As far as the fitment of the Inno Shadow 16 Cargo Box # INBRA1210BK being able to clamp around a Rhino-Rack roof rack, it depends on what type of Rhino-Rack crossbars you have on your 2013 Toyota Prius. If you have an aero crossbar system that involves the Rhino-Rack Vortex crossbars like the ROC25 # RR44SR, the Shadow 16 will clamp around those as well. The only caution is that the Shadow 16 will not fit Rhino-Rack Heavy Duty Crossbars like the # RB1250. I am happy to say that all 4...
view full answer...
- Dimensions of Rhino-Rack Heavy-Duty Roof Rack CrossbarsThe Rhino-Rack Heavy-Duty 50-Inch Roof Rack Crossbar # RB1250S has cross-section dimensions of 1-7/8-inches tall and 1-5/8-inches wide, as shown in the photo I prepared for you. We also offer two bars as a set # RB1250. The vehicle known as the Mitsubishi Pajero in other countries is called the Montero in the North American market. If you happen to have a 2006 model year with factory installed roof rails that run front-to-back this crossbar can be installed using leg kit part # CXB.
view full answer...
- How to Determine if Rhino-Rack CXB Leg Kit Fits a 2022 Subaru Forester for HD Bars & Roof Top TentThe Rhino-Rack CXB Leg Kit for Raised, Factory Roof Rack Side Rails # CXB will fit the factory rails on your 2022 Subaru Forester as long as those rails are not more than 1-1/2" tall and not more than 2-1/4" wide. This would allow you to use Rhino Rack HD cross bars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250. It is also important to note that since these use the Rhino Rack HD bars, you may have a difficult time finding a rooftop tent that fits. That is because the HD bars...
view full answer... - Recommendations for Rhino-Rack HD Roof Rack on a 2013 Volkswagen Jetta SedanI am happy to help you find a roof rack for your 2013 Volkswagen Jetta Sedan. For naked roofs, the roof rack will mount to the door frame of your vehicle using a custom fit hook. The Rhino-Rack HD # RB1650 does not have a confirmed fit custom mount for your Jetta, but the # RB1250 does. You will need the legs # RRRLKHD and custom fit kit # DK055 to complete your roof rack system. Check out the video below for a detailed explanation on how these racks are installed and why the custom...
view full answer... - Leg Spacers for the Rhino-Rack RCH LegsIf you're looking for the leg spacers to mount Heavy-Duty crossbars to your RCH Legs, part # RRRCH6, then the correct part number for those are # RRQMHD05. With these, you'll be able to mount Rhino-Rack HD Bars, part # RB1250. This may seem confusing at first because the fit-guide states that these are not compatible with your 2007 Lexus GX 470. However, in this particular (and very rare) case, the specific vehicle does not matter because these are attaching to the legs. In other words,...
view full answer... - What are the Dimensions of the Hi-Lift Jack Mounting Brackets # RJHBI went out to the warehouse and found that the internal dimension of the Hi-Lift Jack Mounting Brackets # RJHB would allow a post that is about 1" thick and about 2-3/4" high. These come with T-bolts that let you mount them on Rhino-Rack Heavy-Duty roof-rack crossbars like part # RB1250.
view full answer...
- Weight Capacity Of The Rhino Rack RLTF Roof Rack System.If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space! You should verify that the vehicle's roof can handl that weight too though.
view full answer... - 2017 Hyundai Tucson Heavy Duty Roof Rack RecommendationThank you for all of the info! I definitely have a roof rack solution so you can carry some ladders with your 2017 Hyundai Tucson but at this time (February 2022) Rhino-Rack doesn't have a roof rack fitment for your Tucson so we won't be able to install a roof rack using the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250. As an alternative option I recommend going with the Yakima HD Crossbar roof rack system. The crossbars won't increase the weight capacity of the roof rack since your...
view full answer... - Will the 65" Rhino-Rack HD Crossbars # RB1650 Fit on My 2010 Mazda 3 Hatchback?I have an answer for you. Unfortunately, the 65 inch Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1650 are too long for your 2010 Mazda 3 Hatchback with fixed mounting points. With that being said, you can still have shorter Rhino-Rack Heavy-Duty crossbars on your vehicle. Our installation team here at etrailer has tested these shorter bars with your vehicle so that they will fall within the required dimensions of local traffic laws. For this system, you will need the following parts:...
view full answer... - Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load RatingI checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
view full answer...
- Can I Use The Batwing Awning # RR33200 With My Factory Crossbars?The Rhino Rack Batwing Awning # RR33200 is a bolt on installation so it won't be able to work with your factory crossbars. You'll need to add another roof rack system with tracks to be able to use the batwing awning. You can use something like these legs # CXB and these bars # RB1250. These have a channel which will work with the hardware on the Batwing. You will need this mounting kit # RR31102. I personally have not used the XTM 270 Batwing Awning before. So I think that the batwing...
view full answer... - Heavy Duty Roof Rack Recommendation for 2013 Hyundai SonataFor stuff like lumber from a home center type store I would recommend the Rhino Rack HD roof rack part numbers # RB1250, # RRRLKHD, and # DK250 as it is confirmed as a fit and has large square bars that are great for what you are looking for. For load stops you would then want the pat # RRRLH1. Then for cinch straps part # RRRTD35P. This rack has a capacity of 110 lbs but you would also need to check the roof capacity of your vehicle in the owners manual.
view full answer... - Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with HardtopThe 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
view full answer... - Availability of Rhino-Rack Heavy Duty Roof Rack Option for 1997 Nissan Pathfinder w/ Roof TracksWe do indeed have a system that would work on your Pathfinder. In order to use the Rhino Rack Heavy Duty 50 inch long crossbars on your 1997 Pathfinder, you would use the leg system Rhino Rack specifically designed for the recessed roof tracks, part # RLTFMV. The rack has a 220 lb capacity, which could be limited by the roof's actual capacity if it's lower than that of the rack.
view full answer... - Rhino-Rack Heavy Duty Roof Rack for 2018 Volkswagen PassatThe Rhino-Rack # Y01-140B-NT is designed to fit roof mounted tracks such as what would be found on a camper shell, it's not typically used on a vehicle roof. You can install a similar rack using the following parts: • Rhino-Rack Heavy Duty 50 inch crossbars, part # RB1250B-2 for black or # RB1250 for silver • Series 2500 Legs, part # RRRLKHD • Vehicle-Specific fit clips, part # DK323 This rack has a 165 lb capacity and is custom designed to fit your vehicle.
view full answer... - Sturdy Roof Rack Recommendation for 2008 Chevy CobaltFor a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
view full answer... - Hobie Outback Kayak Roof Top Carrier for a 2018 Ford F-250 Crew Cab With Short Bed Camper ShellWith the weight of your Hobie Outback Kayaks being between 85 and 103lbs from the factory you will want to use the a Rhino-Rack setup. It is rated for 209lbs versus the 165 that the Yakima is capable of holding. For your 2018 Ford F-250 you will need 2 sets of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16. One set for the cab of your F-250 and one set for your Leer camper shell. Next you will want Track Mount RLTF Legs # RLTF. You will need one set for each Rhino-Rack Heavy-Duty...
view full answer... - Rhino Rack RT-Style Roof Rack Track Installation for 2014 Mercedes-Benz Sprinter Cargo VanI spoke with Tony, my contact at Rhino Rack, and he assured me that you will only install the Rhino-Rack RT-Style Roof Track, # RB1800B-2, # RLTF, # RRRTS546, from the outside of your 2012 Mercedes-Benz Sprinter. There is no need to remove your headliner or any of the lights/accessories on the interior. To install the rails, you will need to remove the plugs on your Sprinter's roof with a flat head screwdriver in order to secure the track with the T-bolts provided. You will also need...
view full answer...
- What Are Rhino-Rack RLTF Legs Made OfThey are plastic, and according to Rhino-Rack, the Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall # RLTF are made of glass-reinforced nylon. So it is not injection-molded, but glass-reinforced nylon is designed to be extremely stable and durable.
view full answer... - Quick Mount Nuts for Rhino Roof Rack TracksAccording to Rhino-Rack, their M8 x 16.5 # RR72XB T-bolts are meant to fit in the top channel of their crossbars. For the tracks, you'd want to use # RRQMFK11 which are compatible with the Rhino-Rack roof tracks. The Rhino Rack # RLTF leg kit would include the necessary hardware to attach the leg to the tracks. If you could reply and tell me how long of a crossbar you needed, I'd be happy to make a recommendation.
view full answer... - How to Use Roof Top Tent on Truck Bed with Tonneau Cover InstalledIf the tonneau cover on your Toyota Tacoma installs completely inside the bed rails then you can install crossbar tracks like the Rhino Rack # RRRTV168 that you mentioned for a 5-1/2 foot bed or part # RRRTV208 for a 6-1/2 foot bed. Just note that you will need to cut into a factory plastic bed liner if present where the rivets for the tracks need to attach. Then with the tracks installed you can add the Rhino Rack RLTF Legs # RLTF and the Heavy-Duty Crossbars # RB1800B. Whether or not...
view full answer... - Adding A Front Crossbar To 2013 Ford Transit Connect That Has Rear Rhino-Rack Heavy Duty CrossbarSince you only have the single Rhino-Rack Rear Heavy-Duty Crossbar and Legs 50" # RLZ02-DC, you will need to add a different leg kit and another crossbar for the front. You will need Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 50" # RB1250S and Track Mount RLTF Legs # RLTF.
view full answer... - Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of TrackYes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
view full answer... - Recommended Ladder Rack and Tonneau Cover Combo for 2020 Jeep GladiatorI have a solution for you, but the Track Mount RLTF Legs # RLTF you mentioned are not a fit in Truck Hero rails; additionally those rails are not designed to fit on your 2020 Jeep Gladiator. When it comes to compatible tonneau covers and ladder racks/cargo racks that will work on your 2020 Jeep Gladiator we've only found one combination that will work together. You will need a tonneau cover that mounts completely inside of the bed rails and does not stick up, and a ladder/cargo rack that...
view full answer...
- Will Rhino-Rack Track Mount RLTF Legs Flat Mount to RTC16 TracksThe Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTF will work out for a flat mounting to the Rhino-Rack RTC-Style Roof Rack Tracksm # RTC16. So you ordered correctly, but you will need to use the included wedges, and once you get the crossbars on with the legs, you'll have a flat mounting surface.
view full answer... - Do Rhino-Rack RT-Style Roof Rack Tracks # RTS508 for 2012 Range Rover Sport Work with OEM RackIf you installed the Rhino-Rack RT-Style Roof Rack Tracks # RTS508 on your 2012 Land Rover Range Rover Sport these are intended for use with Rhino-Rack track-mounted legs, including parts # RLTP, # RLTF or # RLT500. These tracks are not listed as being compatible with the Range Rover OEM roof rack so to confirm I checked with my technical contact at Rhino-Rack. My contact there also could not provide any assurance of compatibility of these tracks with the OEM roof rack. The RTS508 tracks...
view full answer... - Rhino-Rack Roof Rack for a 2018 Mercedes Sprinter 2500 High Roof with No Factory Roof RackRhino-Rack RT tracks, # RRRTV208 are a great start for your 2018 Mercedes Sprinter 2500 with naked roof. The tracks are compatible with certain leg styles. The legs hold the crossbars and while the tracks will accept different leg styles Rhino-Rack recommends RLTF legs # RLTF with crossbars # RB1800. These tracks will attach to the factory anchor points on the vehicle which means the installation is not as invasive as it could be on other vehicles that do not have anchor points.
view full answer... - Can Awning Mount Directly to Rhino-Rack RTC-Style Roof Rack Tracks I do have a solution for you, however awnings like the Rhino-Rack Batwing # RR33100 cannot mount directly to the RTC-Style Roof Rack Tracks # RRRTC8JWMY11. The issue is the awning will require a certain amount of vehicle overhang from its attachment point like what roof rack crossbars (as long as they aren't flush with the mounting feet) would provide. This allows for clearance between the awning and vehicle when in use. I also don't recommend attaching an awning to the tracks using...
view full answer... - Will Rhino-Rack RLTF Roof Rack Legs Fit the Factory Tracks on a 2014 Mercedes SprinterOn the Rhino-Rack Track Mount legs # RLTF the square nuts that fit inside the track channel are 3/4 inches wide. Measure the track opening at the bottom where it is the widest. It will need to be 3/4 inches wide or slightly wider to accommodate the RLTF legs. If the tracks on your 2014 Mercedes Sprinter match up then you can use bars # RB1800. If the tracks have different dimensions let me know.
view full answer... - Will Rhino Rack Foot Kit part # RLTF Fit the Channels on the Top of 2008 Fleetwood BaysideCan you measure the width of channel on the roof of your 2008 Fleetwood Bayside? Nearly all of them are made to the same specs and have a 3/4 inch wide channel at the widest point which is what the # RLTF is designed to fit. Basically the square nut that would ride in the channel is 3/4 inches wide and if the channel on your roof matches that this will work just fine.
view full answer...
- Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau CoverAs long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
view full answer... - Do I Have the Correct Parts for a Truck Bed Crossbar System on My 2020 Ford F-150 Raptor?The - Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14, Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2 # RLTF, and Rhino-Rack Heavy-Duty Roof Rack Crossbar - Black - 71" Long - Qty 1 # RB1800B (x2) are technically compatible parts. However, the Roof Rack Tracks are only designed for you to install with drilling, which will damage your truck rails. Also, it is doubtful whether you will be able to attach a nut on the...
view full answer... - Is the Rhino Rack RRRTS530 Track System a Fit on 2008 Saturn AuraThe Rhino-Rack RT-Style Roof Rack Tracks # RRRTS530 are a universal track system that can be mounted on any vehicle with a naked roof. These tracks are 43-5/16" long, so you'll want to make sure that you have at least that much space length-wise on the roof of your 2008 Saturn Aura in order to make sure they'll fit. These tracks are compatible with the # RLTP-2 , # RLTF , # RLT500-2 and # RRRLT600 Rhino Rack foot packs. You will also need cross bars to complete your roof rack kit. If you...
view full answer... - Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
view full answer... - Rack To Support Rooftop Tent Over A Truck Tonneau CoverA great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
view full answer... - Rivet Holes on a Rhino-Rack RT-Style Roof Rack Tracks for a 2016 Mercedes-Benz Sprinter 2500The Rhino Rack RT Style Tracks, part # RRRTS546 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500. However, you will need to drill two holes on the rear of each track to install the included rivets. The complete kit for this is: Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2 2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF Rhno Rack RT-Style Roof Rack Tracks,...
view full answer... - Long Track Roof Rack Solution for Sprinter Van with 170 inch WheelbaseWe have the 71 inch long Rhino Rack Roof Tracks part # RTC18 which would do best to run the length of your Sprinter 170 inch wheelbase model. This is our longest option and also the best choice. For feet then you'd want two sets of the # RLTF and then for bars you'd want the part # RB1500B-2 for a set of 59 inch long bars or # RB1800B-2 for 71 inch bars.
view full answer... - Weight Capacity Of The Rhino Rack RLTF Roof Rack System.If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space! You should verify that the vehicle's roof can handl that weight too though.
view full answer... - Rhino-Rack Roof Rack with 3 Inch Tall Legs for a 2012 Land Rover Range Rover SportThe RLTP legs are only available in 2 inch height. For 3 inch height you can use RLCP legs, # RLT500 or RLTF legs # RLTF. But for a 2012 Range Rover Sport you can use complete roof rack # RSPT508 which comes with 3 inch tall legs.
view full answer... - Can Rhino-Rack Vortex Aero Crossbars Be Cut to SizeIt is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
view full answer... - Hobie Outback Kayak Roof Top Carrier for a 2018 Ford F-250 Crew Cab With Short Bed Camper ShellWith the weight of your Hobie Outback Kayaks being between 85 and 103lbs from the factory you will want to use the a Rhino-Rack setup. It is rated for 209lbs versus the 165 that the Yakima is capable of holding. For your 2018 Ford F-250 you will need 2 sets of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16. One set for the cab of your F-250 and one set for your Leer camper shell. Next you will want Track Mount RLTF Legs # RLTF. You will need one set for each Rhino-Rack Heavy-Duty...
view full answer... - Rhino Rack RT-Style Roof Rack Track Installation for 2014 Mercedes-Benz Sprinter Cargo VanI spoke with Tony, my contact at Rhino Rack, and he assured me that you will only install the Rhino-Rack RT-Style Roof Track, # RB1800B-2, # RLTF, # RRRTS546, from the outside of your 2012 Mercedes-Benz Sprinter. There is no need to remove your headliner or any of the lights/accessories on the interior. To install the rails, you will need to remove the plugs on your Sprinter's roof with a flat head screwdriver in order to secure the track with the T-bolts provided. You will also need...
view full answer... - What Are Rhino-Rack RLTF Legs Made OfThey are plastic, and according to Rhino-Rack, the Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall # RLTF are made of glass-reinforced nylon. So it is not injection-molded, but glass-reinforced nylon is designed to be extremely stable and durable.
view full answer... - Quick Mount Nuts for Rhino Roof Rack TracksAccording to Rhino-Rack, their M8 x 16.5 # RR72XB T-bolts are meant to fit in the top channel of their crossbars. For the tracks, you'd want to use # RRQMFK11 which are compatible with the Rhino-Rack roof tracks. The Rhino Rack # RLTF leg kit would include the necessary hardware to attach the leg to the tracks. If you could reply and tell me how long of a crossbar you needed, I'd be happy to make a recommendation.
view full answer... - How to Use Roof Top Tent on Truck Bed with Tonneau Cover InstalledIf the tonneau cover on your Toyota Tacoma installs completely inside the bed rails then you can install crossbar tracks like the Rhino Rack # RRRTV168 that you mentioned for a 5-1/2 foot bed or part # RRRTV208 for a 6-1/2 foot bed. Just note that you will need to cut into a factory plastic bed liner if present where the rivets for the tracks need to attach. Then with the tracks installed you can add the Rhino Rack RLTF Legs # RLTF and the Heavy-Duty Crossbars # RB1800B. Whether or not...
view full answer... - Adding A Front Crossbar To 2013 Ford Transit Connect That Has Rear Rhino-Rack Heavy Duty CrossbarSince you only have the single Rhino-Rack Rear Heavy-Duty Crossbar and Legs 50" # RLZ02-DC, you will need to add a different leg kit and another crossbar for the front. You will need Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 50" # RB1250S and Track Mount RLTF Legs # RLTF.
view full answer... - Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of TrackYes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
view full answer... - Recommended Ladder Rack and Tonneau Cover Combo for 2020 Jeep GladiatorI have a solution for you, but the Track Mount RLTF Legs # RLTF you mentioned are not a fit in Truck Hero rails; additionally those rails are not designed to fit on your 2020 Jeep Gladiator. When it comes to compatible tonneau covers and ladder racks/cargo racks that will work on your 2020 Jeep Gladiator we've only found one combination that will work together. You will need a tonneau cover that mounts completely inside of the bed rails and does not stick up, and a ladder/cargo rack that...
view full answer... - Will Rhino-Rack Track Mount RLTF Legs Flat Mount to RTC16 TracksThe Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTF will work out for a flat mounting to the Rhino-Rack RTC-Style Roof Rack Tracksm # RTC16. So you ordered correctly, but you will need to use the included wedges, and once you get the crossbars on with the legs, you'll have a flat mounting surface.
view full answer... - Do Rhino-Rack RT-Style Roof Rack Tracks # RTS508 for 2012 Range Rover Sport Work with OEM RackIf you installed the Rhino-Rack RT-Style Roof Rack Tracks # RTS508 on your 2012 Land Rover Range Rover Sport these are intended for use with Rhino-Rack track-mounted legs, including parts # RLTP, # RLTF or # RLT500. These tracks are not listed as being compatible with the Range Rover OEM roof rack so to confirm I checked with my technical contact at Rhino-Rack. My contact there also could not provide any assurance of compatibility of these tracks with the OEM roof rack. The RTS508 tracks...
view full answer... - Rhino-Rack Roof Rack for a 2018 Mercedes Sprinter 2500 High Roof with No Factory Roof RackRhino-Rack RT tracks, # RRRTV208 are a great start for your 2018 Mercedes Sprinter 2500 with naked roof. The tracks are compatible with certain leg styles. The legs hold the crossbars and while the tracks will accept different leg styles Rhino-Rack recommends RLTF legs # RLTF with crossbars # RB1800. These tracks will attach to the factory anchor points on the vehicle which means the installation is not as invasive as it could be on other vehicles that do not have anchor points.
view full answer... - Can Awning Mount Directly to Rhino-Rack RTC-Style Roof Rack Tracks I do have a solution for you, however awnings like the Rhino-Rack Batwing # RR33100 cannot mount directly to the RTC-Style Roof Rack Tracks # RRRTC8JWMY11. The issue is the awning will require a certain amount of vehicle overhang from its attachment point like what roof rack crossbars (as long as they aren't flush with the mounting feet) would provide. This allows for clearance between the awning and vehicle when in use. I also don't recommend attaching an awning to the tracks using...
view full answer... - Will Rhino-Rack RLTF Roof Rack Legs Fit the Factory Tracks on a 2014 Mercedes SprinterOn the Rhino-Rack Track Mount legs # RLTF the square nuts that fit inside the track channel are 3/4 inches wide. Measure the track opening at the bottom where it is the widest. It will need to be 3/4 inches wide or slightly wider to accommodate the RLTF legs. If the tracks on your 2014 Mercedes Sprinter match up then you can use bars # RB1800. If the tracks have different dimensions let me know.
view full answer... - Will Rhino Rack Foot Kit part # RLTF Fit the Channels on the Top of 2008 Fleetwood BaysideCan you measure the width of channel on the roof of your 2008 Fleetwood Bayside? Nearly all of them are made to the same specs and have a 3/4 inch wide channel at the widest point which is what the # RLTF is designed to fit. Basically the square nut that would ride in the channel is 3/4 inches wide and if the channel on your roof matches that this will work just fine.
view full answer... - Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau CoverAs long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
view full answer... - Do I Have the Correct Parts for a Truck Bed Crossbar System on My 2020 Ford F-150 Raptor?The - Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14, Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2 # RLTF, and Rhino-Rack Heavy-Duty Roof Rack Crossbar - Black - 71" Long - Qty 1 # RB1800B (x2) are technically compatible parts. However, the Roof Rack Tracks are only designed for you to install with drilling, which will damage your truck rails. Also, it is doubtful whether you will be able to attach a nut on the...
view full answer... - Is the Rhino Rack RRRTS530 Track System a Fit on 2008 Saturn AuraThe Rhino-Rack RT-Style Roof Rack Tracks # RRRTS530 are a universal track system that can be mounted on any vehicle with a naked roof. These tracks are 43-5/16" long, so you'll want to make sure that you have at least that much space length-wise on the roof of your 2008 Saturn Aura in order to make sure they'll fit. These tracks are compatible with the # RLTP-2 , # RLTF , # RLT500-2 and # RRRLT600 Rhino Rack foot packs. You will also need cross bars to complete your roof rack kit. If you...
view full answer... - Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
view full answer... - Rack To Support Rooftop Tent Over A Truck Tonneau CoverA great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
view full answer... - Rivet Holes on a Rhino-Rack RT-Style Roof Rack Tracks for a 2016 Mercedes-Benz Sprinter 2500The Rhino Rack RT Style Tracks, part # RRRTS546 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500. However, you will need to drill two holes on the rear of each track to install the included rivets. The complete kit for this is: Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2 2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF Rhno Rack RT-Style Roof Rack Tracks,...
view full answer... - Long Track Roof Rack Solution for Sprinter Van with 170 inch WheelbaseWe have the 71 inch long Rhino Rack Roof Tracks part # RTC18 which would do best to run the length of your Sprinter 170 inch wheelbase model. This is our longest option and also the best choice. For feet then you'd want two sets of the # RLTF and then for bars you'd want the part # RB1500B-2 for a set of 59 inch long bars or # RB1800B-2 for 71 inch bars.
view full answer... - Weight Capacity Of The Rhino Rack RLTF Roof Rack System.If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space! You should verify that the vehicle's roof can handl that weight too though.
view full answer... - Rhino-Rack Roof Rack with 3 Inch Tall Legs for a 2012 Land Rover Range Rover SportThe RLTP legs are only available in 2 inch height. For 3 inch height you can use RLCP legs, # RLT500 or RLTF legs # RLTF. But for a 2012 Range Rover Sport you can use complete roof rack # RSPT508 which comes with 3 inch tall legs.
view full answer... - Can Rhino-Rack Vortex Aero Crossbars Be Cut to SizeIt is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
view full answer... - Roof Rack and Paddleboard Carrier Recommendation for 2019 Honda Odyssey with Naked RoofSince your 2019 Honda Odyssey does not have any rails at this time you'd need to install a set of crossbars so that you could carry stand up paddleboards like with the Rhino Rack roof rack part numbers # RRVA126B-2, # RRQMVA10, # RRRTV168, and # RRRLT600 so that you could install a paddleboard carrier like the part # LR54FR which can carry up to 2 paddleboards.
view full answer... - How to Use Roof Top Tent on Truck Bed with Tonneau Cover InstalledIf the tonneau cover on your Toyota Tacoma installs completely inside the bed rails then you can install crossbar tracks like the Rhino Rack # RRRTV168 that you mentioned for a 5-1/2 foot bed or part # RRRTV208 for a 6-1/2 foot bed. Just note that you will need to cut into a factory plastic bed liner if present where the rivets for the tracks need to attach. Then with the tracks installed you can add the Rhino Rack RLTF Legs # RLTF and the Heavy-Duty Crossbars # RB1800B. Whether or not...
view full answer... - What Kayak Carrier and Roof Rack do You Recommend for My 2015 Honda Odyssey with Bare Roof?If you have a naked roof on your 2015 Honda Odyssey, all of our available traditional roof racks for your vehicle require drilling into your roof for installation. For that route, I recommend the following: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" # RRVA126B-2 - Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 10 mm Thick # RRQMVA10 - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" # RRRTV168 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars...
view full answer... - Does Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 Have to Install with RivetsI would recommend you use rivets to install the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 that come with it as they'll be flush enough that accessories will still slide in the tracks. If you find a flush enough bolt to fit you certainly could still go that route.
view full answer... - Roof Rack Recommendation for 2015 Honda Odyssey EX-LWe have roof racks that will fit your 2015 Honda Odyssey with a naked roof like the Rhino Rack roof rack part numbers # RRVA126B-2, # RRQMVA10, # RRRTV168, and # RRRLT600.
view full answer...
- Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon RoofFoam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
view full answer... - Installation of Rhino-Rack Roof Rack Tracks on 2003 VW Eurovan MV with RivetsThe Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long - Qty 2 # RRRTV168 are not designed to be mounted in the rain channels, but rather close to them. You still want rain to move away from your doors and not settle in areas you've drilled holes, so the actual gutter is not ideal. However, you do want to be close to the edge because that is the strongest support so close but not in the channel is ideal. A small hand rivet tool is not recommended but a concertina (accordion...
view full answer...
- Roof rack for 2014 Honda OdysseyAfter researching and checking with other manufactures, we have a roof rack that will work but drilling is required. I could not find the roof rack kit that you were looking for. Mainly because of the sliding doors on your Honda Odyssey, they interfere with those brackets. If you've seen some on the road they are most definitely an older design and they discontinued making them because of the issues. The only type of roof rack for your Honda Odyssey would be this kit with the crossbars...
view full answer... - Aero Roof Rack for 2016 Honda Odyssey with Naked RoofFor your 2016 Honda Odyssey with bare roof I do have a black aero-type bar roof rack system that I can recommend without hesitation, the Rhino-Rack Vortex Aero system. This rack consists of 49-inch black aero bars that will generate less wind noise than all other shapes, and the rack offers a 165-lb total weight capacity. The complete system consists of parts # RRVA126B-2, # RRQMVA10, # RRRTV168 and # RRRLT600.
view full answer... - How to Add Roof Rack to 2003 Volkswagen EurovanTo add crossbars to your 2003 VW Eurovan you're going to need an attachment point of some kind unless you want to use the SeaSucker Monkey Bars Roof Rack # 298-SX6000B which uses a vacuum-mount. If you do not want to use the SeaSucker, I recommend the Rhino Rack Vortex Aero Roof Rack. This will require the following parts: -Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long - Qty 2 # RRRTV168 -Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 # RRVA150B-2 -Rhino-Rack...
view full answer... - 2016 Honda Odyssey Roof Rack That Doesnt Require Permanent MountWe don't have any fit kits for the door jambs of your 2016 Honda Odyssey from any of our manufacturers. You could add a Rhino-roof rack using parts: # RRVA126B-2, # RRQMVA10, # RRRTV168, # RRRLT600. I am sure this is more than you are looking for. Another easy option for you is the SeaSucker Monkey Bars # 298-SX6000B. These are extremely easy to install and are strong enough for highway speeds and rated for 165 lbs. It utilizes vacuum cups rated for 210 lbs pull strength each.
view full answer... - Size of Rivets Included with Rhino-Rack RT-Style Roof Rack TracksI reached out to my contact at Rhino-Rack and he said the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 include 1.6mm - 6.3mm rivets. You will use a 5mm drill bit to make the holes that they install inside.
view full answer... - Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau CoverAs long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
view full answer... - Dimensions and Leg Compatibility of Rhino-Rack RT-Style Roof Rack Tracks RRRTV168Rhino-Rack tracks # RRRTV168 are 66-1/8" long x 1-1/2" wide x 1/2" tall. Yes, they are compatible with the RLT600 legs # RRRLT600. They are also compatible with Rhino-Rack RLTP, RLTF, and RLT500 legs.
view full answer... - What is Overall Length of Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 with EndcapsThe 66 inch length of the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 includes the end caps. Now with that said you could trim down the track as needed. The Yakima Landing Pad 1 part # Y00221 does fit this as well.
view full answer... - Recommended Roof Rack For 2019 Honda Odyssey With Naked RoofIn order to mount your Thule Cargo Box on the nakef roof of your 2019 Honda Odyssey you will need a crossbar setup. The best crossbar setup for your vehicle is the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. This is a 49" long low-profile crossbar with a weight capacity of 165lbs. With this crossbar you will also need Legs # RRRLT600, Leg Spacers # RRQMVA10, and Roof Tracks # RRRTV168. Drilling is required, but it is still a fairly simple installation process. I have included a detailed...
view full answer... - Recommendation for Mounting Pioneer Rack to 2022 Kia Telluride with Naked RoofTo add a roof rack to your 2022 Kia Telluride you'll need to use a Yakima system as that is the only type of roof rack that we currently (November 2021) know will fit. The JetStream crossbars will give you the most flexibility so you'll need the following: 60" JetStream Crossbars - Black # Y00426 BaseLine Towers - # Y28TR BaseClips - # Y06125 and # Y06165 This setup is custom fit so you won't have to modify anything on your new vehicle and it will allow you to use the Universal Pioneer...
view full answer... - Rack To Support Rooftop Tent Over A Truck Tonneau CoverA great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
view full answer... - Recommended Replacement Rhino Rack Crossbars for a 2021 Honda OdysseyBen, the rack you're looking at is not going to work with your 2021 Odyssey, unfortunately. The bars itself will be able to be transferred between vehicles, but the legs and fit kit will not. You'd need to also get the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount # RRRTV168, the Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars # RRQMVA10, and the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600. This can be a pretty involved process for someone who...
view full answer... - Rhino-Rack Rivet Mounted Roof Rack for 2020 Winnebago View 24VYou can use rivet-mounted tracks to install a Rhino-Rack roof rack on your 2020 Winnebago View 24V motorhome, I'd just recommend paying special attention to sealing the roof where the rivets are. What you need first are the tracks, and with such a long roof, you can pick the length that works for you: - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long # RRRTS534 - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58-1/2" Long # RTS502 - Rhino-Rack RT-Style Roof Rack...
view full answer...
- Comparing Crossbar Roof Rack and Raised Side Rails for 2019 Honda OdysseyThe weight capacity for the raised rails for your 2019 Honda Odyssey part # e99034 is the same as the weight capacity of the roof racks that attach to the fixed points of your roof like with # RRVA126B-2, # RRQMVA10, # RRRTV168, and # RRRLT600 at 165 lbs. If the goal is for crossbars to be installed on your Odyssey I would just go with the Rhino Rack. It gives you same capacity and costs less overall since it wouldn't require additional components beyond them.
view full answer... - Rhino Rack Roof Rack that Fits 2018 Honda Odyssey with Naked RoofFor your 2018 Honda Odyssey that has a naked roof the Rhino Rack roof rack part numbers # RRVA126B-2, # RRQMVA10, # RRRTV168, and # RRRLT600 is a confirmed fit. I double checked with them. We also had the chance to install this rack on a similar 2014 Odyssey which I attached an install video link to on this page.
view full answer... - Potential Roof Rack Option For 2006 Roadtrek 170Certainly nothing that is any type of custom fit but you might be able to use something that mounts to tracks such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long # RRRTV168. Then you'd need the right crossbar length to go with Legs # RRRLT600H. I'm not sure what your roof measures so I've added a link below to our selection of tracks and you can filter through them by size.
view full answer... - What Is The Narrowest Roof Track?Hi David, I checked the 5 styles of tracks we carry and it looks like the Rhino Rack options will be the most narrow at 1-1/2". In case you were curious about the other style (and brands), I have all my findings listed below. 1-1/2" wide - Rhino-Rack RT-Style Roof Rack Tracks - 66" Long # RRRTV168 1-5/8" wide - Thule Top Tracks for Roof Racks - 60" Long # THTB60 2" wide - Yakima 60" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD # Y74MR 1-5/8" wide - Yakima 60" Tracks for Roof...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Updated by:
Alex H
Written by:
Bethann B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.